How can I find the output resulting from 4. Clock Pulse?Your diagram shows JK flip flops, not T type.
Which type is your question about.
How does a JKFF behave if, as in the diagram, the inputs are tied together?Your diagram shows JK flip flops, not T type.
Which type is your question about.
There are a few ways, but all of them have at their core walking through the states of the overall machine.How can I find the output resulting from 4. Clock Pulse?
How does a JKFF behave if, as in the diagram, the inputs are tied together?
how can we find a solution by road?There are a few ways, but all of them have at their core walking through the states of the overall machine.
You could make a timing diagram that includes the inputs and outputs of all of the FFs in the circuit.
You could apply the transition rules to each FF for as many clock cycles as needed to get back to your starting state.
You could draw a state diagram by walking through the states and determining which state it goes to for each possible input (you actually don't have any inputs, so this is pretty easy).
When the JK inputs are both high it acts as a T flip flip.Your diagram shows JK flip flops, not T type.
How do I find the sequence that occurs after 4 clock pulses?When the JK inputs are both high it acts as a T flip flip.
You work it out, step by step:How do I find the sequence that occurs after 4 clock pulses?
Why do you only care about 4 clock pulses?How do I find the sequence that occurs after 4 clock pulses?
In post #1 the initial state was given as 000. Did you miss that?Why do you only care about 4 clock pulses?
What is the starting state? You need a defined starting state in order to figure out what it will be after four clock pulses?
Yes, I missed that. Thanks for pointing it out.In post #1 the initial state was given as 000. Did you miss that?
Can you teach me how to create the table?Yes, I missed that. Thanks for pointing it out.
Look in your text book and through your lecture notes. Then make your best attempt and show your work.Can you teach me how to create the table?
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
D-type flip-flop on SPICE | PCB Layout , EDA & Simulations | 11 | ||
I am trying to make a Synchronous 4-bit counter using SR Flip-flop | Homework Help | 5 | ||
M | R/S flip flop usage in DC/DC converters | Power Electronics | 5 | |
K | Looking for Flip Flop D Prescaler | Digital Design | 10 | |
Designing a frequency divider | Microcontrollers | 5 |