Hi again....once again I'm kind of stuck here and I come here for help! So I have this question I sort of understand....at least to some degree but what I'm having difficulty understanding is how to get I(source). Just the way its drawn throws me off but if you give me a second to explain to what extent i understand I hope you can fill in my gaps of knowledge.
So....I assume at the left most dot it reads 24V...I initially mistook it as a source voltage........so along that red line i drew about the middle black line is a potential of 24V all across. Now I know across the 10K and 2K resistors since they are to ground the Voltage across has to be 24V. Conversely the 4k has an 8V reading meaning the V across that must be 24-8 = 16V. Thats all fine and dandy but what about I(source)?. The asnwer is actually 1.84mA but my question is How can I have a source current smaller than a value of I? KCL states that what goes in must come out....if my I value is 4mA how can my Is be smaller?
Any help is much much appreciated...
So....I assume at the left most dot it reads 24V...I initially mistook it as a source voltage........so along that red line i drew about the middle black line is a potential of 24V all across. Now I know across the 10K and 2K resistors since they are to ground the Voltage across has to be 24V. Conversely the 4k has an 8V reading meaning the V across that must be 24-8 = 16V. Thats all fine and dandy but what about I(source)?. The asnwer is actually 1.84mA but my question is How can I have a source current smaller than a value of I? KCL states that what goes in must come out....if my I value is 4mA how can my Is be smaller?
Any help is much much appreciated...
Attachments
-
35.4 KB Views: 25