All About Circuits

SNVA829 Simple Constant Current/Constant Voltage Buck Converter

H

Thread Starter

hoyyoth

Joined Mar 21, 2020
309
May I know how the equation is obtained for CC.I tried with nodal analysis but failed.

Can someone please help me.


1667666655293.png
 
ronsimpson

ronsimpson

Joined Oct 7, 2019
3,043
Papabravo said:
You do realize that you cannot achieve both CV & CC at the same time.
Click to expand...
In the case of LEDs. Your supply will run in CC mode, and only switch to CV if the LEDs break open. Most CC LED drivers will make too much voltage with no load and things will brake if there is not a limit.

(with no load) You are looking at a buck where Vout will go to Vin. In the case of a flyback supply, Vout goes up without limit until the IC/transistor breaks.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
M Would this simple current limiter actually work? General Electronics Chat 8
Laszlo Szabo 1 HT12E / HT12D RF433 not fast enough, for a simple led flasher? Wireless & RF Design 17
P Looking for simple and cheap 4S BMs and fuel gauge recommendations Power Electronics 2
Guru_007 How to design MOSFET driver circuit for driving a simple motor? General Electronics Chat 6
H Modifying a simple bi-polar LED circuit Digital Design 39
Similar threads
Would this simple current limiter actually work?
HT12E / HT12D RF433 not fast enough, for a simple led flasher?
Looking for simple and cheap 4S BMs and fuel gauge recommendations
How to design MOSFET driver circuit for driving a simple motor?
Modifying a simple bi-polar LED circuit

You May Also Like

Top