Hi, I am trying to repair a KY-05036S-12.
It failed with a violently blown main fuse (glass broken).
I have been over the board with mm and the only obvious fault is an open circuit primary side DC filter cap (47F, 400V).
My question is, would this cause the mains fuse to blow violently? The switching is done by 5MC0380.
Thank you.
It failed with a violently blown main fuse (glass broken).
I have been over the board with mm and the only obvious fault is an open circuit primary side DC filter cap (47F, 400V).
My question is, would this cause the mains fuse to blow violently? The switching is done by 5MC0380.
Thank you.