I am referring to the following application note AN1017. I find so many calculations going on very confused. So many questions but if some one can help to understand the first basic thing then i can go advance a little.
The TImer1 input Clock converts what? Why should i take Timer1? In the sense let us take some 20MHz as the clock. The motor is running at let us say 6000 rpm (rotations per minute) => (6000 / 60) rps (rotations per second) => 100 rps. For 10 pole motor it is 100 * 10 rps. How to proceed to the next step is it something like
1000 rotations ---> 1 second
(?) rotations ---> (1/20MHz)
This is what the equation is trying to achieve? Please help.
The TImer1 input Clock converts what? Why should i take Timer1? In the sense let us take some 20MHz as the clock. The motor is running at let us say 6000 rpm (rotations per minute) => (6000 / 60) rps (rotations per second) => 100 rps. For 10 pole motor it is 100 * 10 rps. How to proceed to the next step is it something like
1000 rotations ---> 1 second
(?) rotations ---> (1/20MHz)
This is what the equation is trying to achieve? Please help.
Attachments
-
313.9 KB Views: 7