Simulation with QSPI FLash in genesys 2

Thread Starter

bornnnn

Joined May 10, 2023
2
I'm working with QSPI and I have Genesys 2 broad. I want to connect Flash in this broad like a peripheral and run some tests. But It seem like signal not working corrrectly and no SCK connect via STARTUPE2. Have anyone met this problem before?
 

Thread Starter

bornnnn

Joined May 10, 2023
2
I'm working with pulpissmo platform and i have some tests with qspi. when simulator with questasim, every thing work correctly so I move on running in fpga. So Genesys 2 have a qspi flash on boad and in it's reference, almost signals can connect via port by xdc file. But SCK signal is diffence and must be driven through STARTUPE2 (module is suggested by Xillin). But when I check result in osilloscope, SCK not working and other signal work uncorrectly. So I don't know what I start fixing first.
 
Top