See attached.

View attachment 149509 View attachment 149510

Hello,
I've try to make the simulation run but i got some errors :
path\LM25117Test.net(40): syntax error
.IC=V(OUT)=0
^^^^^^^^^
path\LM25117_TRANS-LTSpice.LIB(106): Expected expression or number here.
V_UGmiphase_V2 UGmiphase_N14647872 0 1 dc###>

i've tried to patch those but i'm pretty new in ltspice and to sure of what i'm doing here. Any thoughts on what is hapenning here ?

Thank you for your job and your help.

Clement

Mod: link to old thread.
https://forum.allaboutcircuits.com/...ry-issues-with-simulation.147299/post-1254884

 

Hi Clement,
Welcome to AAC.
It runs OK for me, but VERY slow simulation.

I will tag @eetech00 he may be able to advise.
E

 

Hello,
I've try to make the simulation run but i got some errors :
path\LM25117Test.net(40): syntax error
.IC=V(OUT)=0
^^^^^^^^^
path\LM25117_TRANS-LTSpice.LIB(106): Expected expression or number here.
V_UGmiphase_V2 UGmiphase_N14647872 0 1 dc###>

i've tried to patch those but i'm pretty new in ltspice and to sure of what i'm doing here. Any thoughts on what is hapenning here ?

Thank you for your job and your help.

Clement

Mod: link to old thread.
https://forum.allaboutcircuits.com/...ry-issues-with-simulation.147299/post-1254884

Hi

Here is updated files (LTspice 24.1.10).
There will be messages "Warning: Simulation tolerance relaxed to achieve convergence..." but you can ignore or play with the simulation tolerances.
Simulation completes in about 170 seconds.

 

Hi,
That circuit simulation, now works for me.
E