The below p-channel MOSFET circuit is configured to work as a simple high side power switch,
The circuit works fine with the IRF9Z34STRLPBF MOSFET Datasheet but it doesn't work with the CXDM4060P Datasheet
They are both P-channel MOSFETs (ENHANCEMENT-MODE)
I use both chips for two different circuits with different current requirements.
CXDM4060P chip test:
Vgs -12v
drain GND = 0v
VCC drain = 11.6V
------------------
Vgs 0v
drain GND = 0v
IRF9Z34STRLPBF chip test:
Vgs -12v
drain GND = 24v
-----------------
Vgs 0v
drain GND = 0v
The circuit works fine with the IRF9Z34STRLPBF MOSFET Datasheet but it doesn't work with the CXDM4060P Datasheet
They are both P-channel MOSFETs (ENHANCEMENT-MODE)
I use both chips for two different circuits with different current requirements.
CXDM4060P chip test:
Vgs -12v
drain GND = 0v
VCC drain = 11.6V
------------------
Vgs 0v
drain GND = 0v
IRF9Z34STRLPBF chip test:
Vgs -12v
drain GND = 24v
-----------------
Vgs 0v
drain GND = 0v