Shorted Treadmill Controller

Thread Starter

benjaminh

Joined May 1, 2017
1
I accidentally shorted out my treadmill motor controller and am wondering if there is anyway to fix it. The circuit board is scorched underneath the two resistors marked R8 and R44 respectively. No signs of scorching anywhere else on the board. Could it only be the resistors that are fried, or is it likely that one of the quad comparators, opto-isolators, etc, is fried? I've attached pics of the circuit board, both the top (no scorching visible) and the bottom where the scorching is evident.
 

Attachments

Top