Well here it is for those who are interested in a sequencing switch without ICs
I had fun designing this



Edit: The mosfet at the switch isnt even needed

Description:
The first 6 mosfets from left to right (actually only 5 is needed) function as a 2-Bit Ripple Counter. The rest is for logic gate

 

Reducing part counts:

Next: adding another stage

 

Another Stage: Part counts way up... yikes!

 

16 Channels!
Using 1 CD4069UB

Built and tested 8 Channels, dont have enough mosfets for 16 lol but it should work.
Version 3 was revised, only needed a total of 6 fets for 8 channels.
If only lighting low current LEDs, the 2 P-Mos could just be removed