Hi,
I have a CNC with a DWP611 DeWalt router. Specs say it can draw 7Amps.
I want to automatically turn the router off when the job completes, so I'd like to do this with a relay/SSR.
There are several different "gizmos" out there for remote control of lights etc; however, they are not
spec'd for 120VAC/7Amp inductive load (i.e. the router).
I'd prefer to control it with 5v from a Pi, just to avoid more circuitry that would be needed to step it up.
Thanks,
I have a CNC with a DWP611 DeWalt router. Specs say it can draw 7Amps.
I want to automatically turn the router off when the job completes, so I'd like to do this with a relay/SSR.
There are several different "gizmos" out there for remote control of lights etc; however, they are not
spec'd for 120VAC/7Amp inductive load (i.e. the router).
I'd prefer to control it with 5v from a Pi, just to avoid more circuitry that would be needed to step it up.
Thanks,