Hi Everyone! I'm pretty new to the forums here but after taking a look around I thought this was the best place to seek an answer to a question that has been irritating me to no end. I'm a vaper (holla to the others who might be in here), and a pretty advanced one at that. I am however just now beginning to desire a deeper understanding of the mechanics of these devices that i use every day, so that, hopefully, one day soon i can build them. So i have a series box mod that is regulated (power mode in W). My question is why does my mod only fire, if regulated at a certain wattage, down to a certain percentage, say 70%, of my remaining battery power? I have a vague understanding of why, but I'd really like to have a concrete answer, and to see the math behind it, and I haven't been able to find that anywhere else on the web.
If anyone here is kind enough to show the math for this problem, the details of the particular circuit i have set up would be a series of two batteries with capacities of 3000 mAh and a max of 35A discharge connected to a parallel set of .36 ohm resistors, and I have the wattage set to 120, which by the way is well within the parameters of the device that they are housed in.
If anyone here is kind enough to show the math for this problem, the details of the particular circuit i have set up would be a series of two batteries with capacities of 3000 mAh and a max of 35A discharge connected to a parallel set of .36 ohm resistors, and I have the wattage set to 120, which by the way is well within the parameters of the device that they are housed in.