Hello
I need to programme a ST10 IC. What tool and the hardware can use that? Anybody can help me?

 

Welcome to AAC!

What is the full part number of the ST10 chip?
Have you checked the ST.com website for a solution?

 

Welcome to AAC!

What is the full part number of the ST10 chip?
Have you checked the ST.com website for a solution?

ST10F276-CEG
ST10F269-Q3

 

Next question - Why do you want to program an ST10F2xx chip?
If you are attempting to clone a chip, forget it.

 

Next question - Why do you want to program an ST10F2xx chip?
If you are attempting to clone a chip, forget it.

Yes.
I want to clone it.

 

OEM will protect their IP. You will not be able to read the code in the good chip.

 

OEM will protect their IP. You will not be able to read the code in the good chip.

So. How to do it? This is a Automotive control unit chip. That ic burned. How can repair it.

 

You need to replace the ECU or get qualified service to reprogram the ECU.

https://ecutek.zendesk.com/hc/en-gb/articles/207345569-ECU-programming-guide

 

http://shop.martech.pl/en/programmer/82-st10-flasher.html

http://shop.martech.pl/pl/akcesoria/70-martech-box-iii.html

Please see that.

 

You still have to find the correct ROM code for you specific vehicle.

 

You still have to find the correct ROM code for you specific vehicle.

How to find that. That is a Mercedes benz Actros truck.

 

How to find that. That is a Mercedes benz Actros truck.

Let me try. You keep asking the same question expecting a different answer. Mercedes Benz does not want you to do what you are trying to do which is repair your vehicle. They have taken a number of steps designed to make it difficult or impossible to do what you are trying to do. After a chip has been programmed they program a fuse in the device to prevent it from being read or verified. Unless you have access to the original files or an unlocked device you will continue to spin your wheels until you get tired of the effort.

One thing confuses me. If you can afford a Mercedes Benz, why are you trying to repair it on the cheap? Can't you just dip into your mountain of cash and buy a complete new module and have it installed by a dealer? They might even wash the truck for you. How can you beat that?

 

No. I'm a technician.

 

No. I'm a technician.

OK then tell your customer what I just told you. You do not have the material or the tools to do the job. Tell him/her to take it to a dealership. They have the tools and the material.