Hi,
I Have Bluetooth device that I should click on the switch for 4 seconds for the device power up.
the switch is 2 pads in the PCB, 1 of them connected to the battery+ of the device.
Now, is this schematic will work as "automatic clicker" ?
Thanks to "kubeek" from the forum that built that schematic !!
Thanks in advance...
I Have Bluetooth device that I should click on the switch for 4 seconds for the device power up.
the switch is 2 pads in the PCB, 1 of them connected to the battery+ of the device.
Now, is this schematic will work as "automatic clicker" ?
Thanks to "kubeek" from the forum that built that schematic !!
Thanks in advance...