Hi everyone, I need some help please.. I bought a Milwaukee 18v Battery Charger for a drill and screwdriver I have and it seems to be dead.
I have 12v across pin 1 (black) and 3 (red) and 4 (green) and 3 9red) when a battery is connected. When there is nothing connected I have a small voltage (4v) across pins 2 (yellow) and 3 (red).
The leds are not lit, I cannot see any obvious damage, all tracks on the circuit board look great.
My batteries and totally dead and i need to get some volts in them!
I have 12v across pin 1 (black) and 3 (red) and 4 (green) and 3 9red) when a battery is connected. When there is nothing connected I have a small voltage (4v) across pins 2 (yellow) and 3 (red).
The leds are not lit, I cannot see any obvious damage, all tracks on the circuit board look great.
My batteries and totally dead and i need to get some volts in them!
Attachments
-
787.6 KB Views: 4