I''ve connected the pickit3 to a PIC16F18446. All the connections are correct. MPLAB X IPE v5.4 tells me that it is connected:
Connecting to MPLAB PICkit 3...
Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.56.07
Firmware type..............Enhanced Midrange
Programmer to target power is enabled - VDD = 5.000000 volts.
Target device PIC16F18446 found.
Device Revision ID = 2001
However when I try to upload a program to it from MPLAB IDE, I keep getting the same following errors:
PICkit 3 connected
*****************************************************
Connecting to MPLAB PICkit 3...
Invalid command response (sent 0x41, received 0x26)
*****************************************************
Connecting to MPLAB PICkit 3...
Invalid command response (sent 0x41, received 0x3f)
Connection Failed.
It is connected but for some reason it wont upload to the pic and the connection stops. I've tried two different pics of the same type (16f18446), they aren't the issue and the pickit is new. What do i do to fix this problem.
Connecting to MPLAB PICkit 3...
Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.56.07
Firmware type..............Enhanced Midrange
Programmer to target power is enabled - VDD = 5.000000 volts.
Target device PIC16F18446 found.
Device Revision ID = 2001
However when I try to upload a program to it from MPLAB IDE, I keep getting the same following errors:
PICkit 3 connected
*****************************************************
Connecting to MPLAB PICkit 3...
Invalid command response (sent 0x41, received 0x26)
*****************************************************
Connecting to MPLAB PICkit 3...
Invalid command response (sent 0x41, received 0x3f)
Connection Failed.
It is connected but for some reason it wont upload to the pic and the connection stops. I've tried two different pics of the same type (16f18446), they aren't the issue and the pickit is new. What do i do to fix this problem.