Hi,

Does anyone have a link for a user manual for this product that I bought: ? I asked the Seller on Amazon,but there was no answer and the printed instructions on the back of the board are cryptic to say the least (see photos on Amazon.):

Agatige PIC Programmer Kit

Back of Board Jumper Instructions (Click on 3+ in the pictures section, and then in the choices that come up, click on the 8th square for back of board picture)

-Kei

 

That almost looks like a BOB, rather than a programmer, it has very few features and no apparent electronics on board?

 

yes, its just a universal seat for the pic so that you can use a pickit to program it, but i am not sure how to set the jumpers.

- kei

 

Just reverse-engineer the board circuit, not much there.

 

It's not that complicated.



J1 jumpers are oriented across the board and short the A position, B position or C position pins together.

J2 and J3 jumpers are oriented lengthwise with the board, and short either pins 1 and 2 or pins 2 and 3.

 

The jumper instructions are printed on the back ...
https://m.media-amazon.com/images/I/713Q8PWtoZL._AC_UF894,1000_QL80_.jpg

 

Thanks, Jon and All, you guys impressed me

- Kei