I need the design files and a BOM, as well as layer thicknesses. I also need the firmware from an SPI memory IC on the PCB. Traces on the layout need to be plotted exactly how they appear on the board (I'm hoping to pass FCC certification as an intentional emitter). I'm not sure how many layers the board has but it's at least four, so I don't think I'd be able to accurately replicate it myself.
I'm looking for recommendations as well as objective comparisons, and if you have any experience with particular vendors then your input would be greatly appreciated.
Thank you in advance!
I'm looking for recommendations as well as objective comparisons, and if you have any experience with particular vendors then your input would be greatly appreciated.
Thank you in advance!