Hi J and E,
J, see #31
E, see #38 EDIT.
How important is placing the 100nF caps within 5mm of the VDD-VCC PINS?
There isn't a heat sync under any of the Regs. Do you think I should start again and make another PCB, with the above requirements before moving on?
J, see #31
E, see #38 EDIT.
How important is placing the 100nF caps within 5mm of the VDD-VCC PINS?
There isn't a heat sync under any of the Regs. Do you think I should start again and make another PCB, with the above requirements before moving on?
Attachments
-
280.2 KB Views: 5
-
281.8 KB Views: 5