I am trying to clamp a signal on an existing circuit it does not appear to completely turn off the control P4_1 is only 3v3 IO signal.
For safety, I want to be able to clamp the output at pin7 is the device suitable 2N7002. I am only using it as I have a similar circuit using non inverting amplifier and 5v control line it does have a pull-up resistor for the gate.
For safety, I want to be able to clamp the output at pin7 is the device suitable 2N7002. I am only using it as I have a similar circuit using non inverting amplifier and 5v control line it does have a pull-up resistor for the gate.
Attachments
-
17.8 KB Views: 17