Hoping to find (have someone who will/can e-mail a scan) the schematic for an OLD, probably antique Bell & Howell / DeVry Electronics Lab Design Console.
There had been a prior post/thread http://forum.allaboutcircuits.com/threads/electro-lab-reference.85171/, but did not see a (any) reply. I would rather be able to check / double check parts - circuits PRIOR to powering up.
I will be glad to send a picture if it helps. A sloped panel with binding posts etc. at the top (highest portion) and controls on the lower (closest to operator) portion. Sloped sides are blue metal and the upper center area is black plastic 'peg board'. LOL, I still have the white plastic wiring connectors which go in the peg board.
Odds are somewhere I still have the assembly - operation manual but to date have NOT found it.
Not sure if including my e-mail address is 'allowed' (didn't see/find it in the TOS). I would prefer a scanned copy vs. paper copy, but if you cannot scan, please let me know. E-mail <SNIP>
THANKS for any 'n ALL help!
Ms. Robin Adair
Moderators note: removed email to protect you from spambots
There had been a prior post/thread http://forum.allaboutcircuits.com/threads/electro-lab-reference.85171/, but did not see a (any) reply. I would rather be able to check / double check parts - circuits PRIOR to powering up.
I will be glad to send a picture if it helps. A sloped panel with binding posts etc. at the top (highest portion) and controls on the lower (closest to operator) portion. Sloped sides are blue metal and the upper center area is black plastic 'peg board'. LOL, I still have the white plastic wiring connectors which go in the peg board.
Odds are somewhere I still have the assembly - operation manual but to date have NOT found it.
Not sure if including my e-mail address is 'allowed' (didn't see/find it in the TOS). I would prefer a scanned copy vs. paper copy, but if you cannot scan, please let me know. E-mail <SNIP>
THANKS for any 'n ALL help!
Ms. Robin Adair
Moderators note: removed email to protect you from spambots
Last edited by a moderator: