Need a little help from the forum. I have a router (woodworking) that has blown a tantalum smd capacitor on the board and need to identify it if possible. Here is what I have for markings
EPCOS
C155
R9 06
I believe it is 1,500,000 pF. Is that correct? Is that the same as 1.5 uF?
If good so far, what voltage am I looking for. I'm guessing in the range of 16 V?
Let me know if you can. Thank you
EPCOS
C155
R9 06
I believe it is 1,500,000 pF. Is that correct? Is that the same as 1.5 uF?
If good so far, what voltage am I looking for. I'm guessing in the range of 16 V?
Let me know if you can. Thank you