Need help with an inverter

Thread Starter

JonathanL

Joined Jun 12, 2020
16
Hi guys
I am having trouble with an inverter the link to actual inverter is below. When i wire it up and try run it in auto it does nothing. I can run it in local mode and it is ok but when I switch to auto it does nothing. For a quick test i have put 24 volts onto terminal DL1 and it wont run. I have changed the settings on the inverter to suit the standard macro and 3 wire macro from the manual on pages 57 and 58 but it still wont run. I am assuming because it runs in local that it will run in auto and that i am just missing a setting but i cannot seem to find it and it could be something silly but i cannot find it. Any help would be great.

Thanks guys





https://ie.rs-online.com/web/p/inve...32313132383426&searchHistory={"enabled":true}
 
Top