That sounds more like mechanical problem?

 

That sounds more like mechanical problem?

That's what i was thinking, and assumed the motor given all other issues that usually cause this have been checked?

 

That's what i was thinking, and assumed the motor given all other issues that usually cause this have been checked?

Just checked. After walking on it yesterday and it slowing it tripped the circuit switch. Turned back on and looked to move the sensor and test that, but on starting the fuse blows again so not sure if the board has now the same mosfet issue. So it seems that perhaps the overload on the belt, perhaps due to fault with motor, leads to an overheat on the controller board leading to the mosfet issue? Are motor issues common?

 

Motor issues are rare, seems to point to a loading problem, ?

 

Motor issues are rare, seems to point to a loading problem, ?

That is what I read. And had a spare motor with the same symptoms

Read here for example

https://www.topfitnessmag.com/treadmill-stops-when-i-step-on-it/

And troubleshooted what was suggested, and beyond motor I'm at a loss.

Think the treadmill will be going in the bin!

 

Most of the Board & motor problems can be confirmed by bench testing both.