I have a Mac SE FDHD that has the screen a bit too wide. I opened it to adjust things and see the variable inductor (L2) is a bit messed up. The hollow core (that a non-conductive hex tool goes inside) has been chipped on the ends and I cannot rotate it to adjust it. I would replace the variable inductor with something new (Digikey or Mouser) but do not know the component values (uH, etc...).
I found the schematics online for the SE, but still cannot find info on this inductor to find a suitable replacement.
Does anyone have any info/guidance on this? Thanks, in advance.
-- Jason
I found the schematics online for the SE, but still cannot find info on this inductor to find a suitable replacement.
Does anyone have any info/guidance on this? Thanks, in advance.
-- Jason