Yes, you can use the SW model from the library (icon below).May a use one of the available switches in the library?
Hi Eric!hi grace,
Welcome to AAC.
What are the timings?
E
Hi crutschow,Yes, you can use the SW model from the library (icon below).
It's controlled by the + and - inputs.
You also need a Spice directive (shortcut key "S") such as .model sw SW(Ron=0.001 Roff=100Meg Vt=0.5 Vh=.01 for the switch.
Then you apply a voltage (pulse) source to the control inputs where any voltage above 0.5V closes the switch contacts, and any voltage below 0.5V opens the contacts.
View attachment 222384