Hi.. I tried to simulate a simple capacitor charging circuit in LTspice but the output values I get are just not right.
Here's the netlist.
I used the 'transient' option for simulation. The current I get are in the fA and pA range. This cannot be true, because the circuit is based on a question from a text book. I can't figure out what's wrong with the circuit.. or simulation options.
Here's the netlist.
Rich (BB code):
"ExpressPCB Netlist"
"SwCAD III Version 4.12c"
1
0
0
""
""
""
"Part IDs Table"
"C1" "5.0µF" ""
"R1" "2000000" ""
"V1" "12V" ""
"Net Names Table"
"N001" 1
"0" 3
"N002" 5
"Net Connections Table"
1 1 1 2
1 2 2 0
2 1 2 4
2 3 2 0
3 2 1 6
3 3 1 0
Attachments
-
14.6 KB Views: 174