Hi,

I want to generate six pwm signals to control an IGBT module, which I attach its datasheet. The signals are HIN1,2,3 and LIN1,2,3.
I also attach two pictures about what I am interested in.

My question is:

What should I take into consideration to generate those six pwm signals to control the gates? I mean, frequency, dead time, etc.
What can I use to generate them? Can I use an Arduino Nano which allows six pwm channels?



I would appreciate your help.

Thanks.

 

I've used dsPIC30F4011to drive those chips, driving a BLDC.
The dsPIC has the needed 6 PWM generators and inputs to read the Hall sensors.
https://www.microchip.com/wwwproducts/en/dsPIC30F4011
There are quite a few the range.

 

I've used dsPIC30F4011to drive those chips, driving a BLDC.
The dsPIC has the needed 6 PWM generators and inputs to read the Hall sensors.
There are quite a few the range.

Thank you. I have looked into the datasheet and it looks pretty well!