Hi, I've got a question. How can I further improve this circuit: http://www.circuitdiagram.org/lm317-5a-variable-power-supply.html
1.) Will this actually output 5A?
2.) Should I add a 10uF cap in parallel with the 5k ohm pot and diodes on LM317's (In, Out) and (Adj, Out) to protect it from the capacitors.
3.) Is it alright if I replace the 3,300uF cap with 10,000uF, 0.33uF with 100nF, and 100uF with 2,200uF?
1.) Will this actually output 5A?
2.) Should I add a 10uF cap in parallel with the 5k ohm pot and diodes on LM317's (In, Out) and (Adj, Out) to protect it from the capacitors.
3.) Is it alright if I replace the 3,300uF cap with 10,000uF, 0.33uF with 100nF, and 100uF with 2,200uF?