Thanks for the reply @ronv ,
I couldn't comprehend what you meant by
Regards,
Teklucifer
I couldn't comprehend what you meant by
Are you talking about my circuit or @crutschow 's, How will it get shorted I still don't understand.The same is true of the current limit. It will only reduce the voltage to 1.2 volts so if the output is shorted the current will still be pretty high. Is this okay
So, now I go back to the LM338? Isn't there something much better with a lower dropout voltage than the lm338?Your voltage is to high for the LM1084. When you add filter capacitors to the bridge rectifier the voltage will be somewhere around 33 volts. The maximum voltage from input to output is 29 volts.
Regards,
Teklucifer