Hey All,
Looking for some assistance in building a light sensor circuit to power 12 LED lights.
I thought I could do a tear down on a 120v night wall plug night light.
Well it appears the circuitry needs more power to be effective as when I power the pictured circuit board with a 12v supply I am getting less than 2 volts on output.
It appears the entire circuit includes and LDR, MCR100-6-P86 semiconductor, and resistor.
Feel free to correct me if my terminology is wrong. Learning as I go here.
My question is what do I need to replace the MCR, and resistor to make this work with low voltage so that I can get 12v DC output?
See included images for your reference and check if I identified items correctly.
Thanks in Advance!
TRU
Looking for some assistance in building a light sensor circuit to power 12 LED lights.
I thought I could do a tear down on a 120v night wall plug night light.
Well it appears the circuitry needs more power to be effective as when I power the pictured circuit board with a 12v supply I am getting less than 2 volts on output.
It appears the entire circuit includes and LDR, MCR100-6-P86 semiconductor, and resistor.
Feel free to correct me if my terminology is wrong. Learning as I go here.
My question is what do I need to replace the MCR, and resistor to make this work with low voltage so that I can get 12v DC output?
See included images for your reference and check if I identified items correctly.
Thanks in Advance!
TRU