Hello ,In the datasheet they dont say specificlly about how to connect all the pins in the chip.
I have made a layout for outputing 6V.
my R2 is 10K and R1 is 2.55K by the math its 5.95.
Did I connected the layout correctly as shown below?
Is the sense pin correctly connected?
Thanks.
https://www.digikey.com/en/products/detail/analog-devices-inc/LT1764ET-PBF/961316




I have made a layout for outputing 6V.
my R2 is 10K and R1 is 2.55K by the math its 5.95.
Did I connected the layout correctly as shown below?
Is the sense pin correctly connected?
Thanks.
https://www.digikey.com/en/products/detail/analog-devices-inc/LT1764ET-PBF/961316




Attachments
-
14.6 KB Views: 0