Attachments
-
651 bytes Views: 4
-
585 bytes Views: 3
-
1.6 KB Views: 2
Last edited:
hi,Works excellent, but this will not work with some high going pulse instead?
Wanted to power a led with a latch when a pulse comes into the latch. The latch would drive some low side transistor to power the led.The simple post #11 circuit doesn't have a reset arrangement, so can't toggle on successive inputs.
Without a reliable power-on-reset, that has limited usefulness IMnsHO. It might be that the TS actually wants an electronic toggle FF (alternate-action circuit). If only there were some way to find out... Hmmm ...As far as I can understand the TS, he is not asking for a Reset function, just a latch On.
hi AK,post 18.
For the LED driver, do you want to toggle the LED On for one Vp input pulse and Off for a following Vp input pulse and so on.? ie: On, Off, On ......
E
As you can see at the end of my post #19, I caught this and acknowledged your action.hi AK,
If you are intent on quoting me, at least use the latest one I posted, post #18. in an effort to find out what the TS is really asking, rather an out dated earlier post.
E
by Aaron Carman
by Jake Hertz
by Aaron Carman
by Duane Benson