KiCad connecting 2 tracks without re reading netlist

Thread Starter

ArakelTheDragon

Joined Nov 18, 2016
1,362
I want to edit the PCB manually and not re read the netlist. But despite that I can change component values and delete them, I can not connect 2 tracks. Any idea how to do this?

Edit: here is the circuit and the 2 tracks I want to connect.
 

Attachments

Last edited:

Thread Starter

ArakelTheDragon

Joined Nov 18, 2016
1,362
I cant find in google how to disable it. I tried "Preferences - general - Enforce design rulles when routing" but that did not fixed it.
 

shortbus

Joined Sep 30, 2009
10,045
Don't you need to go back into schematic capture to do something like that? If it isn't in the schematic it won't be allowed in the PCB.
 

MaxHeadRoom

Joined Jul 18, 2013
28,619
I want to edit the PCB manually and not re read the netlist. But despite that I can change component values and delete them, I can not connect 2 tracks. Any idea how to do this?

.
I believe you can do it by turning off DRC, but not sure if this causes other problems.
Go to the Kicad user forum and post the question, there are plenty of experts there.
Max.
 
Top