I'm simulating a simple three phase bridge rectifier that I have attached. I'm learning LTspice, so I don't know many tricks yet. The point is that everything is fine until I add the line inductors. Why do the inductors disrupt the waveform like that? The green waveform is before the inductor, and the blue waveform after the inductor. I took V1 as example. The same pattern repeats at V2 and V3.
The inductor and capacitor values are taken from a real application circuit. The rectifier diodes breakdown voltage is 1000V, however, the highest I found in LTspice is 750V.
The inductor and capacitor values are taken from a real application circuit. The rectifier diodes breakdown voltage is 1000V, however, the highest I found in LTspice is 750V.
Attachments
-
194.7 KB Views: 96