Hi folks.

I just want to ask one thing that is it possible to interface a 79 GHz radar sensor with arduino for detecting stationary and moving objects thus calculating their speed and acceleration.

If yes, then how is it possible? Do let me know.

Thank you.

 

You are not providing enough data for a meaningful answer.
What sensor ? What Arduino board (there are many) ? Communication protocols ? etc.

 

With 5 seconds worth of searching.

 

You are not providing enough data for a meaningful answer.
What sensor ? What Arduino board (there are many) ? Communication protocols ? etc.

The sensor is AWR1243 by TI and the arduino is Mega 2560.

 

So the AWR1243 communicates with SPI.
Arduino Mega 2560 has the SPI peripheral.
Check the parameters (buffer length and speed) for both sides, master and slave. They must match.

 

So the AWR1243 communicates with SPI.
Arduino Mega 2560 has the SPI peripheral.
Check the parameters (buffer length and speed) for both sides, master and slave. They must match.

Okay I will check those parameters
Thank you.

 

Not going to get much out of that with a atmega
There saying TDA3x SoC processor

Dual ARM® Cortex®-M4 Image Processor (IPU)

• Dual-core, 212.8 MHz per Core