I just got an estim, for which I admit I paid hundreds of £££. However, it seems to me this kit has already failed.
I would like to know what kit I would need to test it.
The control box runs from a 240v mains supply that has a Switching Adapter to 12 volts and 1 amp. The control box has two output jacks, both size 2.5mm. I use either jack, connecting it to a pair of mono-pole skin pads. Each of these can be controlled independently of the other. Each has its own beacon that lights up when a pulse flows. I believe the circuit between the mono-poles completes through the flesh.
On the second occasion of operating these, while I still have both beacons lighting up, only one of the pads produces a current I can feel. The other does not, even when I turn its adjuster to maximum, at which point I hope the circuit won’t complete spontaneously.
What type of “flow” and over what operating range would the tester need to be sensitive to, to check the output of this feed?
I would like to know what kit I would need to test it.
The control box runs from a 240v mains supply that has a Switching Adapter to 12 volts and 1 amp. The control box has two output jacks, both size 2.5mm. I use either jack, connecting it to a pair of mono-pole skin pads. Each of these can be controlled independently of the other. Each has its own beacon that lights up when a pulse flows. I believe the circuit between the mono-poles completes through the flesh.
On the second occasion of operating these, while I still have both beacons lighting up, only one of the pads produces a current I can feel. The other does not, even when I turn its adjuster to maximum, at which point I hope the circuit won’t complete spontaneously.
What type of “flow” and over what operating range would the tester need to be sensitive to, to check the output of this feed?