Hi. I have this circuit where most of it is powered by 9V, but I am using a 5V chip that I am planning to power via a 5V Zener diode.
The IC unit, which gets a signal from the 9V circuit via a voltage divider (to 5V), gives also an output signal that goes to an AND Gate in the 9V circuit ......
My question is: how reliable will the Zener Diode be/works when powering an IC unit? Anyone has used a Zener to powered an IC ?
Notes:
-already know that a 7805 would do the job
-IC Max power=0.45W --> Rz=(9-5)/0.09=44 Ohm
-Any comments about the 9V to 5V interaction?
Thanks.
The IC unit, which gets a signal from the 9V circuit via a voltage divider (to 5V), gives also an output signal that goes to an AND Gate in the 9V circuit ......
My question is: how reliable will the Zener Diode be/works when powering an IC unit? Anyone has used a Zener to powered an IC ?
Notes:
-already know that a 7805 would do the job
-IC Max power=0.45W --> Rz=(9-5)/0.09=44 Ohm
-Any comments about the 9V to 5V interaction?
Thanks.
Attachments
-
260.3 KB Views: 37