All About Circuits

I need help to interface my AD620 IC with 3.3V ADC.

elonmusk

Thread Starter

elonmusk

Joined Nov 14, 2022
1
I have to read K Type thermocouple and i have to amplify this signal by using AD620 to 0 to 3.3v for my STM32 In built ADC.

K type thermocouple range-->-270 °C to 1260°C and an output of -6.4 to 9 mV over maximum temperature range
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
N Need help with Variable Reluctance interface circuit Analog & Mixed-Signal Design 4
Roary Sheehan SPI Interface Circuit to drive LEDs. Need help with wiring components from interface to LED Microcontrollers 1
P Need help on Matrix Keypad Interface Logic General Electronics Chat 10
E Need help for SD card interface with LPC2148 Microcontrollers 1
M Need help to design this serial interface General Electronics Chat 1
Similar threads
Need help with Variable Reluctance interface circuit
SPI Interface Circuit to drive LEDs. Need help with wiring components from interface to LED
Need help on Matrix Keypad Interface Logic
Need help for SD card interface with LPC2148
Need help to design this serial interface

You May Also Like

Top