I can't find the problem. 2 stages amplifier with op amps.

bertus

Joined Apr 5, 2008
22,270
Hello,

There is an offset at the input of the opamp.
In your schematic it shows as -1.53 volts at the output.
This will shift the complete signal down.

Bertus
 

bertus

Joined Apr 5, 2008
22,270
Hello,

The LM741 has an offset, this will be amplified by the second amplifier.
The LM741 has the possibility of offset compensation:

LM741_offset_compensation.png

Bertus
 

bertus

Joined Apr 5, 2008
22,270
Hello,

You have only connected a resistor.
The schematic shows a potmeter with the wiper to the - powersupply.

Bertus
 

bertus

Joined Apr 5, 2008
22,270
Hello,

The position of the wiper will influence the offset.
When it is in the middle it will be like the potmeter is not connected.

Bertus
 
Top