Hello folks,
I intend test this schematic, https://drive.google.com/open?id=0BzJ2AtyPGEWseG1qcDRoekEtZGc , with ADC0809. But when I press the button "run" I can't have any voltage on output ADC0809. What am I doing wrong about configuration the proteus?
The proteus version which I use is 8.5!
Thanks
I intend test this schematic, https://drive.google.com/open?id=0BzJ2AtyPGEWseG1qcDRoekEtZGc , with ADC0809. But when I press the button "run" I can't have any voltage on output ADC0809. What am I doing wrong about configuration the proteus?
The proteus version which I use is 8.5!
Thanks