Looking to find the firmware revision on my Fluke 87V is there a key sequence on bootup?
Thanks!See https://www.eevblog.com/forum/testgear/fluke-87v-pcb-revision-check-before-purchase/
Especially the:
- Turn off the Fluke
- Press and Hold: AutoHOLD
- Switch to DC Voltage
business. But read the whole thread and remember, it is some 7 years old.
Hope it helps and be sure to let us know so the next person will get a heads up.
by Aaron Carman
by Jake Hertz
by Duane Benson