Hello
I have op amp OP07 and TL084 in a board. Some 2to 30 in a board with a MCU onboard.
How to provide the decoupling capacitors for these op amps. +12 and -12 are supply rails?
We need to decouple both rails or one is needed? How the the optimum value is decided?
Thanks
I have op amp OP07 and TL084 in a board. Some 2to 30 in a board with a MCU onboard.
How to provide the decoupling capacitors for these op amps. +12 and -12 are supply rails?
We need to decouple both rails or one is needed? How the the optimum value is decided?
Thanks