Hi Guys,
I'm after some advice to connect a reversing camera yellow video cable to the pin/circuit board of my Erisin ES7677M touch screen head unit ( http://www.erisinwholesale.com/spec...m-62-kia-car-dvd-gps-radio-3g-player-440.html ). Please see attached pics.
Basically, I've been trying to get hold of the RCA loom, which comes with video/audio/power cables to the RCA/AUX port , but to no vail. The model I have is a rare one which came with my car. So I couldn't even find one on Ebay. So I was wondering if I could get a female video connector lead , chop it off and solder the end to the pin number 15 of RCA/AUX port at the back of the unit (please see attached pic).
1. Can I do that? If yes, then to which one I should solder the video cable ground/the other wire?
2. Should I connect the camera power (powered from reversing light) cable to number 11 (back detection), which says 'reverse' on the orage with black tracer wire in the second pic?
Any advice on this much appreciated.
Cheers
I'm after some advice to connect a reversing camera yellow video cable to the pin/circuit board of my Erisin ES7677M touch screen head unit ( http://www.erisinwholesale.com/spec...m-62-kia-car-dvd-gps-radio-3g-player-440.html ). Please see attached pics.
Basically, I've been trying to get hold of the RCA loom, which comes with video/audio/power cables to the RCA/AUX port , but to no vail. The model I have is a rare one which came with my car. So I couldn't even find one on Ebay. So I was wondering if I could get a female video connector lead , chop it off and solder the end to the pin number 15 of RCA/AUX port at the back of the unit (please see attached pic).
1. Can I do that? If yes, then to which one I should solder the video cable ground/the other wire?
2. Should I connect the camera power (powered from reversing light) cable to number 11 (back detection), which says 'reverse' on the orage with black tracer wire in the second pic?
Any advice on this much appreciated.
Cheers