This "corrected" model does not seem to account for the output saturation at the lower rail (0V) when using a single power supply. The minimum output voltage that the op amp can produce is 25mV according to the datasheet.The factory model of this opamp is poorly suited for LTspice.
I made a correction for this model.
And
http://www.analog-innovations.com/
MCP6001_JT.zip
Texas Instruments has a generic equivalent to the MCP6001, called the TLV6001. The TI model is available on their website and works with LT Spice's opamp2 symbol without any need for modification. Just copy the TLV6001.txt model file into the project directory and add the spice directive ".inc TLV6001.txt" to the LT Spice schematic.
* You can search for the TLV6001 on TI.com


