My chainsaw motor has burnt out and I want to rewind it if only for the challenge. Fortunately, it is not the armatoure but the field windings that have burnt. Looking for ideas:
What insulation to use to line the poles so as to rewind them.
What varnish to use on the windings.
What is the best way to rewind i.e. on a bobbin and then slip the windings on to the poles?
What insulation to use to line the poles so as to rewind them.
What varnish to use on the windings.
What is the best way to rewind i.e. on a bobbin and then slip the windings on to the poles?