Hi all,
I need to use the following water level switch .
Description:
I want to use 10k pull up resistor with the switch to connect it with the microcontroller .
The distance between the tank(switch) and the microcontroller 15 m.
Should I modify the connection ?
Thank you .
I need to use the following water level switch .
Description:
- Product Name : Float Switch;Max Contact Rating : Max Contact Rating;10W : 10W;Max Switching Voltage : 100V DC
- Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1.0A;Max Contact Resistance : 100mΩ
- Temperature Rating : -10 ~ +60 °C / +85 °C;Float Ball Material : PP;Float Body Material : PP;Float Ball Size(Approx) : 24 x 17mm /0.94" x 0.7"(L*D)
- Thread Dia(Approx) : 16mm/3/8" PT;Hex Nut Diameter : 23mm /0.9";Body Length : 90mm/3.5";Cable Length : 39cm / 15.3"
- Color : Black;Net Weight : 22g;
I want to use 10k pull up resistor with the switch to connect it with the microcontroller .
The distance between the tank(switch) and the microcontroller 15 m.
Should I modify the connection ?
Thank you .