Help with simulation about PT1000 temperature sensor

Thread Starter


Joined Oct 29, 2020
I would like to ask someone for help regarding PT1000 temperature sensor simulation. I am interested in the following cases:

1. Dependence of voltage on temperature in the range from 1 to 80 degrees Celsius (per degree);

2.Simulation when the sensor is shorted;

3.Simulation with missing sensor;

I am currently using proteus as a simulation product, but I don't know how I can get this information out of the DC Sweep Analysis. Any help would be in use.

Thanks and sorry in advance!:confused:
Best Regards!