Hi all,
I have been working on a project and I have confused myself by over thinking.
I have a 128 pin MCU and I am downgrading to a 100 pin compatible MCU. The firmware is designed for both models, the latter just has less IOs.
My question is, the pin list on both MCUs are different...e.g XIN is on pin1 and on pin 27 on the latter.
I know these will be hardcoded in the firmware but will I need to change some code somewhere or will I just need to connect up the relevant hardware and the firmware should do the rest, as it does for the 128 pin MCU?
Cheers
JSwale
I have been working on a project and I have confused myself by over thinking.
I have a 128 pin MCU and I am downgrading to a 100 pin compatible MCU. The firmware is designed for both models, the latter just has less IOs.
My question is, the pin list on both MCUs are different...e.g XIN is on pin1 and on pin 27 on the latter.
I know these will be hardcoded in the firmware but will I need to change some code somewhere or will I just need to connect up the relevant hardware and the firmware should do the rest, as it does for the 128 pin MCU?
Cheers
JSwale