With my electricity at 115 VAC do I use a hammond with dots connected then other wires connected. One plug to dot and one plug wire to no dot. That would make up a parallel primary connection with 115vac input. Or would I hook up only one
set of primary wires. My schematic is different on my box than this pdf. Parallel causes a buzzing noise and I shut off power strip right away with transformer mounted on wood and wires insulated with white color euro type connector. I need this type of transformer clarified if anyone could help me. Part number 186F48 48VCT @ 2A.
set of primary wires. My schematic is different on my box than this pdf. Parallel causes a buzzing noise and I shut off power strip right away with transformer mounted on wood and wires insulated with white color euro type connector. I need this type of transformer clarified if anyone could help me. Part number 186F48 48VCT @ 2A.
Attachments
-
355.7 KB Views: 10